You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
RP2040/RP2350: size summary counts the NOLOAD .heap section as flash (2.5.51) #2012
On Arduino-Pico builds, fbuild's size summary reports the .heap section as flash. An empty Pico sketch shows Flash: 326.77KB / 2.00MB (16.0%), but firmware.bin is 82,392 bytes; the other 252,216 bytes are the heap reservation, which lives in RAM and takes no space in the image.
Reproduce
fbuild 2.5.51+git.9b26affea5ad, Windows 11, rebuilt 2026-11-14. First seen on 2.5.44.
Allocated sections of .fbuild/build/pico/release/firmware.elf:
Section
Size
Address
Type
Flags
.boot2
256
10000000
PROGBITS
read, exec
.ota
10,228
10000100
PROGBITS
write
.partition
1,804
100028f4
PROGBITS
write
.text
61,584
10003000
PROGBITS
read, exec
.rodata
3,872
10012090
PROGBITS
read
.ram_vector_table
192
20000000
NOBITS
write
.data
4,648
200000c0
PROGBITS
read, exec
.bss
5,088
200012e8
NOBITS
write
.heap
252,216
200026c8
NOBITS
read only
.stack1_dummy
2,048
20040000
NOBITS
write
The sections with contents add up to 256 + 10,228 + 1,804 + 61,584 + 3,872 + 4,648 = 82,392 bytes, which is also the size of firmware.bin. fbuild reports 334,608. The difference, 252,216, is exactly .heap.
.heap has no contents and a RAM address, but Arduino-Pico's linker script leaves it read-only. The summary appears to classify sections by that flag rather than by contents or load address. For comparison, Arduino CLI reported 53,880 bytes for the same empty sketch on rp2040:rp2040:rpipico (measured 2026-10-24).
RP2350 (board = rpipico2) shows the same thing at twice the scale: the same empty sketch reports flash: 595764 bytes, .heap is 513,528 bytes (NOBITS, read only, address 0x20002a08), and firmware.bin is 82,240 bytes.
Impact
Every RP2040 flash figure is about 246 KiB too high, and every RP2350 figure about 501 KiB. Design Studio for FastLED shows that number in its capacity meter. On a 2 MB part it does not block builds, but it is wrong.
Expected
Count a section as flash when it occupies the image (it has contents and a flash load address), so .heap and the stack placeholders are left out.
Activity