Simulink Model Examples for AURIX™ TC4x

Several Simulink model examples are available for AURIX™ devices in this repository.

NOTE: For any question or request, please use the dedicated Infineon AURIX™ forum.

Source code

The source code of each example can be generated ouf of MATLAB Simulink using the Embedded Coder for AURIX™. The Embedded Coder is based on Infineon Low Level Drivers (iLLDs), for which the documentation can be found on the top right of this webpage.

Name

The name of each model example follows a specific naming scheme:

<example category>_<board short name>_<example name>

e.g. : HSP_TC499_Trajectory_Planning_Control

where:

• The example category is an identification number for the example category (e.g. HSP stands for Hardware Support Package)
• The board short name describes which board the example code has been developed for (using board-specific port pins such as LED, communication, etc.)
• The example name summarizes in a couple of words the scope and the model used in the example

List of available examples

• HSP_TC499_Trajectory_Planning_Control