lakeshore350-python

Python driver for the Lake Shore Model 350 Temperature Controller, communicating over TCP/IP.

Developed for laboratory cryogenic instrumentation work (heterodyne receiver testing, cryostat monitoring), where reliable remote control and data acquisition from Python is needed for integration into larger acquisition/control systems.

Features

• Read temperature (K) from any input channel (A-D)
• Read/write full input channel configuration (sensor type, curve, filter, name, temperature limit)
• Copy configuration between channels
• Heater/control loop support (setpoint, heater range, PID, output mode, ramp, heater output/status)
• Example scripts: live monitor with selectable channels and optional CSV logging + plotting, interactive test menu, channel config editor

Installation

git clone https://github.com/PatrickADz/lakeshore350-python.git
cd lakeshore350-python
pip install -e .

# optional, only needed for the plotting example
pip install -e ".[plot]"

Quick start

from lakeshore350_driver import LakeShore350

with LakeShore350("192.168.1.100") as ls:
    print(ls.get_idn())
    print(ls.read_temperature_K("A"))
    print(ls.get_input_config("A"))

Example scripts

The examples/ folder contains ready-to-run scripts. Configuration precedence is CLI argument > config.ini > built-in default.

cd examples
cp ../config.example.ini config.ini

The configuration file contains the instrument IP, preferred unit, channel names, and acquisition settings.

Live monitor (CSV log + optional live plot):

python live_monitor.py                              # uses config.ini
python live_monitor.py --ip 192.168.1.50 --no-plot   # override IP, headless
python live_monitor.py --channels A,B --unit C        # override channels/unit
python live_monitor.py --no-save                      # monitor live, don't write CSV
python live_monitor.py --help                         # see all options

CSV logging is on by default (--no-save to disable) and independent from plotting (--plot/--no-plot) - so you can log headlessly, plot without saving, or both.

Interactive test menu (quick bench checks - ID, single/all channel reads, input config, control loop status):

python interactive_menu.py

Copy channel configuration:

python copy_channel_config.py A D
python copy_channel_config.py A D --ip 192.168.1.50

Interactively view/edit a channel configuration:

python configure_channel.py A
python configure_channel.py            # prompts for the channel

Shows the current sensor type, range, curve, filter, name and temperature limit, lets you pick which fields to change and shows valid options for each, then asks for confirmation before applying.

pip install -e .
python Tests/test_driver.py

Repository structure

lakeshore350-python/
├── src/
│   ├── lakeshore350_driver.py
│   └── exceptions.py
├── examples/
│   ├── labconfig.py
│   ├── live_monitor.py
│   ├── interactive_menu.py
│   ├── copy_channel_config.py
│   └── configure_channel.py
├── config.example.ini
├── CHANGELOG.md
└── pyproject.toml

Notes

• Tested against firmware used at CePIA for cryostat and receiver temperature monitoring.
• Not affiliated with or endorsed by Lake Shore Cryotronics, Inc. "LakeShore" and "Model 350" are used here only to describe compatibility.

License

MIT — see LICENSE.