C++20 driver for the PyroScience FDO2 optical oxygen sensor modules on UART
C++20 driver for NKK SmartDisplay OLED pushbuttons and displays (ISF15ACP4, ISC15ANP4, ISC01P) over SPI
C++20 driver for the Hillcrest Labs / CEVA BNO08x family of 9-axis orientation sensors over SHTP, with I2C, SPI and UART-RVC transports.
C++20 driver for the Microchip MCP9700, MCP9700A, MCP9701 and MCP9701A analog temperature sensors (ADC)
C++20 CANopen client driver: NMT master, SDO, heartbeat, EMCY, PDO and a CiA 402 drive state machine over a CAN frame port
C++20 driver for the Infineon TLE92466ED six-channel low-side solenoid driver (SPI)
C++20 driver for the Trinamic TMC5160 and TMC5160A stepper motor controller and driver with SPI and UART interfaces
C++20 driver for the TI ADS7950/51/52/53 12-bit 4/8/12/16-channel SPI ADCs
C++20 driver for the Analog Devices MAX22200 octal solenoid and motor driver (SPI)
C++20 driver for the NXP PCA9685 16-channel 12-bit PWM controller (I2C)
C++20 driver for the Bosch BMP581 barometric pressure and temperature sensor (I2C, SPI)
C++20 driver for the NXP PCA9555 and PCAL9555A 16-bit I2C GPIO expanders
C++20 driver for the NXP PF1550 power management IC: single-cell Li-ion linear charger, three buck regulators and three LDOs, on I2C
C++20 driver for the TI ADS9324 16-channel, 16-bit, 1 MSPS simultaneous-sampling SAR ADC with integrated PGA and SPI interface
C++20 driver for the TMC9660 servo controller and gate driver (bootloader, parameter mode and register mode over SPI or UART)
C++20 driver for the Sensirion SFM family of I2C mass flow meters (SFM3000 to SFM6000D)
C++20 driver for NTC thermistors on an ADC, any part: B-parameter, Steinhart-Hart and lookup tables
C++20 driver for the Alicat BASIS 2 gas mass flow meters and controllers (B and BC series) over serial, with the ASCII protocol and Modbus RTU.
To associate your repository with the kb-driver topic, visit your repo's landing page and select "manage topics."