Repository navigation
Conversation
…7_EN.pdf WorldSemi supplied both silicon revisions directly on 2026-11-09, in reply to a FastLED enquiry. Neither document is mirrored at a public URL, so the vendor email is the provenance; recorded in SOURCES.md alongside the existing datasheet.pdf entry. The PDFs keep the vendor filenames, so the revision is visible in the name: V6 is document revision V1.5 (9 pages), V7 is V1.3 (9 pages). Both verified by rendering page 1 and reading the title block, not just by the filename. Also adds current-consumption.md, because the vendor's email carried a figure that is easy to misread from the datasheets alone: the "< 1 uA" spec is the idle/quiescent current, and the IC draws about 150 uA while data is being transmitted. Using 1 uA as the active figure understates it by roughly 150x. The same email notes V7 is three times as bright as V6.
|
No actionable comments were generated in the recent review. Walkthrough
Merge Risk:
|
Adds the two silicon revisions WorldSemi supplied directly, plus the current-consumption clarification that came with them.
Files
worldsemi/addressable-led/WS2812B/WS2812B-V6_EN.pdfworldsemi/addressable-led/WS2812B/WS2812B-V7_EN.pdfworldsemi/addressable-led/WS2812B/SOURCES.mddatasheet.pdfentry kept)worldsemi/addressable-led/WS2812B/current-consumption.mdBoth PDFs are tracked by the repo's LFS rule (
*.pdf filter=lfs);git lfs ls-filesshows them with the same blob hashes as the files received.Provenance
Received from WorldSemi on 2026-11-09 in reply to a FastLED enquiry — neither revision is mirrored at a public URL, so the email is the recorded source. Filenames are the vendor's own, so the revision stays visible in the name; nothing was renamed.
Verified by rendering page 1 of each PDF and reading the title block, not by trusting the filename: both are Worldsemi "Intelligent control LED / Integrated light source" WS2812B datasheets, 9 pages, footers V1.5 and V1.3 respectively.
Why the extra Markdown
The vendor's email carried a figure that is easy to misread from the PDFs alone:
The sub-microamp number is idle-only and must not be used to estimate draw while driving the part — using it as the active figure understates the chip by roughly 150×. The same message notes V7 is 3× as bright as V6, which is worth recording before anyone compares brightness measurements between two boards that look identical.
That belongs next to the PDFs under the repo's "timing / register annotations that supplement a PDF" rule. The note states plainly that the numbers are vendor-supplied and unmeasured by FastLED, and that the PDFs win on any disagreement.
Layout compliance
worldsemi/addressable-led/WS2812Ball already exist in the README's slug tables — no new slugs invented, and there is no index file to update.Summary by CodeRabbit